OKM Geoseeker
Click image to view full sizeItem-Name:
Specification:
OKM Geoseeker
Specification:OKM Geoseeker
- Geoelectric water and cavity detector: Determines the ground resistance up to a depth of 250m and visualizes the measured values in 3D
- Depth: Customers found water up to 250 meters - check our references
- Use cases: water detection, cavity detection, geotechnical engineering
- Operating modes: Geoelectrical scan
- Detectable objects: water deposits, water-bearing gravel, cavities
Made in Germany
Taiwan Sole Dealer:
Jin-Bomb Enterprise Co., Ltd.
Tel.: +886-7-332-2207
More-Details:
Water detector and cavity detector up to 250 meters (820 ft) depth
Are you looking for underground water resources or hidden cavities up to depths of 250 meters (820 ft)? The GeoSeeker is a professional geoelectrical water detector and cavity detector that measures the ground resistivity and visualizes its scan data in incredible 3D graphics. It is a very mobile and easy to operate geoelectrical detector designed and manufactured in Germany.
The GeoSeeker utilizes a geoelectrical measurement procedure based on Schlumberger to read the apparent resistivity of the ground. Based on that ground resistivity the detector is capable to locate underground water deposits, water-bearing gravel and groundwater level as well as cavities like caves, tunnels, chambers and the like. Thus, the geophysical detector can be deployed as water finder or cavity detector at the same time.
GeoSeeker Scan Modes
GeoSeeker hardware components are completely controlled by a modern Android Tablet PC. All commands and measurement results are transferred wireless via Wi-Fi. Using the pre-installed software application you simply select one of three supported scan modes:
- Active Scan (Accurate)
While using this scan mode the GeoSeeker utilizes two electrodes to inject electrical power into the underground soil. Two additional electrodes are measuring the potential difference (fall of voltage) at specific scan points to calculate the final resistivity value. This mode is used to detect underground water deposits, hidden caves or even impervious layers and barriers within the underground soil. In active scans you will be able to define a specific depth range in that you are going to conduct your measurement. So you will define a starting and ending depth between 5 meters (16 feet) and 250 meters (820 feet). - Active Scan (Quick)
This scan mode is a quick version of the accurate scan. It is also injecting electrical current into the underground and measuring the potential difference (fall of voltage) to calculate the resistivity of the ground. - Passive Scan
While using this scan mode the GeoSeeker only utilizes two electrodes to read the natural occurring voltage of the underground (no electrical power is injected into the underground). This mode is used to detect underground flowing water only.
GeoSeeker Software
The GeoSeeker’s software application is providing simple step-by-step instructions to assist you in completing the measurement. You simply follow these pictured instructions until your measurement has been finished. After completing the measurement a graphical 3d representation of the measure values is created and displayed on the screen of your Tablet PC. Some color adjustment options are provided to optimize the graphical 3d visualization of your underground water deposits, water-bearing gravel and groundwater level (shown in bluish colors) as well as cavities, caves, tunnels, chambers or impervious layers (shown in reddish colors).
GeoSeeker Transportation
The GeoSeeker hardware is integrated in a waterproof and shock-resistance Peli case. Thus, your geoelectrical equipment is well packed and always ready for transportation.
More Products
OKM Geoseeker Mini
Water detector and cavity detector up to 100 meters (328 ft) depth Like his big brother GeoSeeker, the GeoSeeker Mini utilizes a geoelectrical measurement procedure based on Schlumberger. The water detector – that can also be used to detect underground cavities – determines the soil resistivity. Based on that apparent resistivity of the ground the detector is able to detect underground water resources like fresh water, drinking water, water-bearing gravel and groundwater level. Based on the fact that underground water has a very good conductivity, you can conclude that very bad conductivity is a hint for hidden cavities like caves, tunnels, chambers and underground rooms. Thus, the geophysical detector GeoSeeker Mini can be deployed as water finder and cavity detector at the same time. Operating the water and cavity detector GeoSeeker Mini The water detector GeoSeeker Mini is operated via touchscreen. Select the measurement depth as well as the amount of scanning points and simply follow the graphical instructions. Due to easy-to-understand images and icons, the GeoSeeker Mini is multilingual by using pure picture language. During the measurement the electrodes have to be replaced several times to measure the ground resistivity at certain places. All instructions can be read from the color display, where the results are presented after each single scan. At the very end of a measurement the final result is shown as a graphical 2D scan image. Data visualization of water resources and cavity After finishing a geoelectrical measurement, the final result is calculated to generate a representative 2D scan image of the underground resistivity. With the pictograms in the lower display area, users can read directly the diagram: The colors in the scheme indicate water deposits (blue with water drops) and/or detected cavities (red with tunnel symbol). Depending on the selection of the size and depth of the measurement, the display contains several columns and is provided with corresponding depth information. Using the left button (water drops) and the middle button (tunnel entrance), the user can switch to simplified representations of the measurement results. Thanks to the realization of step-by-step instructions and results in simple images and pictograms, the GeoSeeker Mini is language-independent. That means, the water detector can be used by inexperienced users all over the world – no matter what language they speak. Geoelectrical applications with GeoSeeker Mini The geoelectrical detector OKM GeoSeeker Mini can be used to detect underground water resources as well as hidden cavities. Both structures can be located due to its specific characteristics of electrical resistivity. Water detection Underground water resources have a good electrical conductivity and measuring its resistivity will result in low apparent resistivity values. The capability of water detection is very useful for dowsers, water finders well builders, drilling companies agriculture, fruit growing mining, building contractors Detectable subsurface water deposits could be ground water level fresh water, drinking water underground watercourse, water veins underground water streams, headwaters Cavity detection Hidden cavities and hollow spaces have a rather poor electrical conductivity and measuring its resistivity will result in high apparent resistivity values. The capability of cavity detection is useful for archaeologists, historians treasure hunters geotechnical engineering military services building contractors Detectable subsurface cavities could be caves, tunnels galleries and manholes chambers, sepulchers, tombs bunkers, vaults, cellars, rooms
OKM Fusion Professional Plus
The metal detector and 3D ground scanner Fusion supports treasure hunters, gold seekers, adventurers and archaeologists to discover lost treasures, buried artifacts, hidden places and other historical items. The advanced version Professional Plus can be used in vertical and horizontal orientation and supports graphical 3D measurements, acoustic magnetic field measurements and instant live images. Operating the OKM Fusion metal detector The advanced professional plus version can be used in vertical and horizontal orientation and supports following operating modes: Ground ScanConduct a graphical 3D measurement for detailed analysis on a computer. Live SoundProcess an acoustical magnetic field measurement to detect ferrous metals. Live Scan (Multi-Sensor, Ultrasound)Process an instant live image while walking the scan field. Utilizing the SRIS search coil to locate shallow metals One of the new detection features is the SRIS search coil that can be used to locate short range metallic objects. This coil can be activated individually by the operator while setting up the operating modes Live Sound, Ground Scan and Live Scan (Ultrasound). The SRIS search coil can be very useful to pin point targets while digging. It is easy to detect the general position of a buried object with the OKM 3D ground scanner and metal detector OKM Fusion. When you start digging it can be really hard to exactly match the correct spots of hidden items afterwards. By checking the excavated material with activated SRIS search coil you won’t miss any small object like: -wedding bands and engagement rings -ear rings, brooches, bracelets and necklace -coins, buttons, badges and pins 3D Visualization of underground treasures While scanning an unknown area and recording the measure values, the Visualizer 3D Software can immediately analyze and visualize this information to display a color-coded 3D graphic of hidden objects and structures. Thus you will literally “see” all buried treasures, gold objects, archaeological artifacts and any other hidden objects before digging. Additionally you can determine the size, position and depth of your detected items. So you know where to dig and how deep to dig to find your objects of interest.
OKM Fusion Professional
The metal detector and 3D ground scanner Fusion is a redesigned and improved version of the Future 2018 Anniversary Edition. It has been designed for starters in the field of 3D measurements and offers easy operation as well as advanced scanning features. The 3D ground scanner Fusion supports treasure hunters, gold seekers, adventurers and archaeologists to discover lost treasures, buried artifacts, hidden places and other historical items. The version Fusion Professional is perfect for beginners with small budgets. Operating the OKM Fusion metal detector The professional version is solely used in vertical orientation and supports following operating modes: Ground ScanConduct a graphical 3D measurement for detailed analysis on a computer. Live SoundProcess an acoustical magnetic field measurement to detect ferrous metals. Utilizing the SRIS search coil to locate shallow metals One of the new detection features is the SRIS search coil that can be used to locate short range metallic objects. This coil can be activated individually by the operator while setting up the operating modes Live Sound and Ground Scan. The SRIS search coil can be very useful to pin point targets while digging. It is easy to detect the general position of a buried object with our 3D ground scanner and metal detector OKM Fusion but when you start digging it can be really hard to exactly match the correct spots of hidden items afterwards. By checking the excavated material with activated SRIS search coil you won’t miss any small object like: wedding bands and engagement rings ear rings, brooches, bracelets and necklace coins, buttons, badges and pins 3D Visualization of underground treasures While scanning an unknown area and recording the measure values, the Visualizer 3D Software can immediately analyze and visualize this information to display a color-coded 3D graphic of hidden objects and structures. Thus you will literally “see” all buried treasures, gold objects, archaeological artifacts and any other hidden objects before digging. Additionally you can determine the size, position and depth of your detected items. So you know where to dig and how deep to dig to find your objects of interest.
OKM Fusion Light
Fusion Light is an easy-to-use ground scanner for treasure hunters who look for buried artifacts and hidden treasures in cavities such as tombs, tunnels and subterranean caches. The treasure detector is a special edition combining the favorite application properties of the powerful Fusion Professional with the flexibility and usability of Rover UC. Operating modes of Fusion Light 3D Ground Scan allows treasure hunters to detect gold treasures as well as underground anomalies and to visualize the scan data immediately on their Smartphone via Android App. With its integrated magnetometer the Fusion Light is able to locate ferrous metals like militaria and iron boxes filled e.g. with silver and gold coins, valuables and precious artifacts. Discover a new dimension in treasure hunting Fusion Light, the compact treasure detector for beginners and treasure hunters with small budget, convinces with simple handling and easy transport – perfect to achieve first successes in treasure hunting very fast. Small scope of delivery that has it all: Fusion Light, the lightweight among the metal detectors and ground scanners, consists of a compact control unit with integrated sensors and is controlled via Android App. The treasure detector offers the functions magnetometer and 3D ground scan, which are essential for successful treasure hunters. The measurement results are visualized graphically with the Android App directly on Smartphone or Tablet. Detect and analyze anomalies with 3D ground scan The 3D Ground Scan feature helps treasure hunters, military seekers and historians track down underground cavities and artifacts. Potential finds and discoveries can be acoustically signaled via smartphone on request. At the same time, the measurement data is displayed on the display of your Android smartphone or tablet via OKM App and can be saved for further analysis. You will get a more accurate 3D image by transferring the scan data to your PC and analyze it with the software Visualizer 3D. If you do not own an Android device, a compatible smartphone or tablet can be added to the Fusion Light package (extra charge). 3D representation of the measurement data with OKM software Visualizer 3D Thanks to the optionally available Visualizer 3D software the measurement data of the 3D ground scan can be displayed in a detailed 3D graphic on the PC. After successful transfer of the stored scan data to the PC, treasure hunters can determine the position, size and depth of the found treasures even more precisely. The Visualizer 3D software is optionally available (at an extra charge). Detecting objects with a magnetometer With the scan function magnetometer the magnetic field of the earth can be measured. Anomalies in the magnetic field indicate potential finds. In this way, artifacts buried for a long time such as treasure chests, old ammunition and other ferrous objects can be detected.
OKM Evolution NTX
3D Metal detector for Treasure Hunters and Gold Seekers The metal detector and 3D ground scanner Evolution NTX can be used by treasure hunters, gold seekers, metal detectorists and archaeologists who are looking for buried objects, hidden artifacts or other lost items like: Lost valuables (rings, coins, jewelries, wedding bands) Buried treasures and artifacts Ancient boxes, chests, chambers and sepulchers Unlike other metal detectors, the Evolution NTX can process graphical 3D images of underground treasure hoards and detected anomalies. Thus, you can determine size and depth of potential finds before digging. The deep penetration capability is just another advantage of our 3D ground scanner. Many great treasure finds prove the potential of our metal detecting technology made in Germany. The successor of Evolution, Evolution NTX, is more compact and comes with improved features like rechargeable internal batteries, easier usability and more powerful sensor and coil technology. Improved Usability Based on our experiences as well as suggestions of many OKM users the new model has been improved and optimized in various aspects: Long-lasting and rechargeable batteries Color touchscreen with higher resolution Integration of Bluetooth headphones More compact and robust design Improved sensor and coil technology Full color display with touchscreen and multilingual user interface allow an easier usability and setup of the metal detector Evolution NTX. The brightness of the screen can be adjusted individually. VLF Metal Detector The combination of our sensor technology with a VLF search coil allows to detect not only near-surface metals, but also deeply buried artifacts and treasure objects. Evolution NTX with telescopic search coil: The length of the metal detector Evolution NTX can be adjusted to the individual body height of its user. Ground Scan and Metal Detection The 3D ground scanner Evolution NTX supports two operating modes to research the underground soils for hidden objects and structures. The length of the detector can be adjusted individually according to your own body height. Thus you can make this metal detector your metal detector. Starting at the main menu you simply select one of the operating modes: Live SoundThis operating mode activates the VLF metal detector to find shallow metal objects like coins, rings and other jewelry. Next to an acoustical output you can also see a simple graphical indication of the signals. 3D ScanThis operating mode is used to conduct graphical 3D ground scans. All scan data is stored into the device’s memory. Those information can be transferred to the Visualizer 3D Software to generate graphical 3D images of underground objects and structures. 3D images via Visualizer 3D Software The metal detector and 3D ground scanner Evolution NTX can be used by treasure hunters, gold seekers, metal detectorists and archaeologists. With the 3D scan function and the software Visualizer 3D you can create a 3D graphic of the underground and find buried coins, rings, jewellery and similar treasure objects and artefacts. Especially metallic objects can be detected successfully. Buried objects are indicated by different colors in a graphical 3D representation. Delivery Scope: 1x Control unit 1x 3D Software ("Visualizer 3D") 1x Waterproof and shock resistant Pelican case 1x Bluetooth headphones 1x USB Bluetooth dongle 1x Charger for control unit 1x Travel adapter 1x User’s manual
OKM Delta Ranger
Treasure Hunting with Multiple Technologies Detectors like the OKM Delta Ranger can't be found in any other store! This multi-technology treasure detector is specialized in the fast and easy detection of gold objects, relics, treasures, voids, tunnels, and tombs in terrains that are hard to access. The detector comprises 6 operating modes in one device: Bionic Stream – OKM's long-range mode to detect freshly hidden gold. Ionic Stream – OKM's long-range mode to detect long-time buried gold. Magnetometer – OKM's fast detection technology for the preparation and optimization of 3D Ground Scans. 3D Ground Scan – OKM's renowned 3D imaging technology detecting treasures down to 60 ft (18 m) depth. Thermo Scan – OKM's thermography mode to map hidden tunnels and rooms behind walls and in the underground. Thermo Stream – OKM's real-time thermography mode to detect hidden caves and tombs behind walls and in the underground. Moreover, Delta Ranger comes with more highlights that take treasure hunters further, and offers user-oriented features like Digital compass Visual target indication Multi-lingual operation in 14 languages that enhance the treasure hunting experience. Control by Smartphone App simplifies sharing and analyzing scan data after measurements. Delta Ranger Knows Where to Find Gold The Light version of the Delta Ranger is the perfect equipment for initial explorations of unknown terrain to find places for successful treasure hunting. Especially treasure hunters who don’t have any clue where to start detecting will appreciate the fast overview of large areas. Long-Range Gold Prospection with Smartphone With the Long-Range Probe (L), the OKM Delta Ranger can be used as a long-range gold detector to find buried objects at distances of several miles. The exact position of gold objects can be determined by using Cross Bearing (Triangulation). Since Ionic and Bionic Stream are long-range search modes, the probe is used in horizontal orientation. Bionic Stream (Bio-Energy-System) During the detection of gold, the Bionic Stream interacts with the detector user’s natural bio-energy to analyze minimum changes of object substances. Gold prospectors and treasure hunters can locate almost all gold objects independent of how long the target object has been buried. Thus, Bionic Stream is especially recommended for the search of freshly buried objects like gold jewelry, gold statues, gold rings, gold coins, gold bars and gold bullions. Ionic Stream (Ions-Chamber-System) The operating mode Ionic Stream measures the ions radiation (ions absorbent) of buried gold objects. Therefore, when measuring, the direction is important for success. The integrated digital compass shows the direction during the measurement. This detection method is specialized for the location of gold artifacts that are buried for a long time. The longer the object is in the underground, the better it can be detected by Ionic Stream. Best Long-Range Performance in Bionic and Ionic Stream Bionic Stream allows to search for gold in humid places, on wet soils and even after rainy days. This operating mode does not require dry grounds like many other long-range detectors. Moreover, both long-range modes, Bionic Stream and Ionic Stream, achieve best performances in sparsely populated areas. Since the integrated sensors are very sensitive to changes of the ionic and bionic fields, the accuracy increases greatly in undisturbed or undeveloped areas. Detect Gold: Triple Feedback on a Hit In the long-range modes, a hit is signaled by: acoustic feedback (if sound is enabled) vibration (if vibration is enabled) visual feedback (flashy crosshairs). Treasure Detection and Verification by Cross Bearing (Triangulation) Triangulation (Cross Bearing) uses two or more points to locate a target. As soon as you get hits on the same target spot from different positions, it is likely it is a potential target. Delta Ranger Professional: More Probes, More Treasures With 2 additional probes, the Delta Ranger becomes a Professional detector, allowing not only long-range gold detection, but also 3D ground scans and deep analyses of the subsurface. Best Depth Performance with 3D Ground Scan Plugging in the Ground Scan Probe (G) unlocks 2 operating modes that allow vertical measurements of the underground: Magnetometer and 3D Ground Scan. Magnetometer The ready-to-use operating mode is recommended to prepare the scan field and clear it of ferrous items close to the surface. This allows to detect buried objects in the ground even deeper and more accurately in the subsequent 3D Ground Scan. 3D Ground Scan OKM is renowned for its 3D imaging detection technology developed and engineered in Germany. 3D Ground Scan is the most performative operating mode to locate target objects as deep as 60 ft (18 m) in the underground. After saving the measurement, treasure hunters can analyze the scan image in detail, and determine the position, size and depth of the detected targets before excavation. Detect Secret Passages and Tunnels with Thermography Using the Thermo Probe (T) unlocks 2 more operating modes that allow both horizontal and vertical measurements: Thermo Scan and Thermo Stream. Thermo Scan With Thermo Scan, larger surfaces can be scanned for temperature differences. Just like in the established 3D Ground Scan operating mode, the surface is measured with the detector following a specific scheme. Thanks to the extremely short probe, the OKM Delta Ranger is ideal for horizontal wall surface measurement. Thus, temperature differences on walls can be made visible and provide clues to hidden rooms and corridors behind them. In addition, the detector with can also be used vertically (like in 3D Ground Scan), to detect underground cavities, chambers and tunnels. Thermo Stream The Thermo Stream operating mode uses the live camera image as background and a socalled false color scheme for the simplified visualization of temperature differences. If both are correctly tuned using the crosshair calibration prior to the measurement, it is possible to precisely determine the surface temperature of objects and surfaces at specific points. The surface temperature of the targeted object is indicated as simplified color point cloud on the camera image, by a pointer on the temperature scale, as value in °Celsius or °Fahrenheit. Void and Cave Detection Inspired by Science Thermography usually uses color associations for products in everyday use, such as those familiar from a thermostat or tap: blue is associated with cold, while red is perceived as warm. In science, so-called false color schemes (or pseudo color schemes) are preferred. The false color representation uses colors that deviate from the natural color impression in order to make fine nuances of a tone more easily distinguishable. The Thermo Scan and Thermo Stream modes rely on this advantage and therefore use the false color spectrum: from black (cold) via blue, purple, red, and yellow to white (warm). Control Unit Dimensions (L x W x D): 11.8 x 5.3 x 8.7" | 300 x 135 x 220 mm Weight: 22.6 oz | 640 g Battery: Li-ion, non-removable Input (max.): 5 V DC, 2 A, 10 W Charge Time: 3.5 h @ 50°F – 86°F | 10°C – 30°C Operating Time: approx. 24 h Processor / Main CPU: Cortex M3, 32 MHz Sample Rate: 1024 values /second Measurement Resolution: 16 bit Operating Temperature: 23 – 122 °F | –5 – 50 °C Storage Temperature: –4°F – 158°F | –20°C – 70°C Air Humidity: 5% – 75% Compass: Yes Waterproof: No Laser Laser Beam Distance: max. 490 ft | 150 m Laser Output: max 2.5 mW Emitted Wavelength: 650 nm Laser: Class 3R (EN 60 825-1) Operating Temperature: 23°F – 122°F | –5°C – 50°C Data Transfer Technology: Bluetooth 5.2 Frequency Range: 2.4 – 2.4835 GHz Maximum Transfer Rate: 1 Mbps Receiving Sensitivity: –85 dBm Maximum Range: approx. 25 ft | 8 m (Line of Sight) Long-Range Probe (L) Length: 7.7" | 195 mm Diameter: 1.6" | 40 mm Weight: 3.7 oz | 105 g Sensor Technology: SCMI-15-D / LD-4E Thermo Probe (T) Length: 9.1" | 230 mm Diameter: 1.6" | 40 mm Weight: 3.9 oz | 110 g Technology: Contactless infrared Optimal Surface Temperature: 50°F – 77°F | 10°C – 25°C Temperature Range: 23°F – 122°F | -5°C – 50°C Resolution: 32.2°F | 0.1°C Accuracy: ±33.8°F | ±1°C Aperture Angle: 5° (± 2.5°) Ground Scan Probe (G) Length: 18.7" | 475 mm Diameter: 1.6" | 40 mm Weight: 5.8 oz | 165 g Sensor Technology: SCMI-15-D The technical data are average values. Minor deviations are possible during operation.
OKM eXp 6000 Professional
3D Ground Scanner and Metal Detector for Highest Demands The eXp 6000 ground scanner and metal detector is one of OKM’s top of the line detecting tools for treasure hunters, metal detectorists, archaeologists, prospectors, gold seekers and ground surveyors. This detector is completely wireless and can be controlled via touchscreen, video eye glasses or notebook. It is the world’s first 3D ground scanner that utilizes the innovative OKM Telescopic Probe which can be extended to 124 cm (4 ft). Artifacts Detected with OKM eXp 6000 in 30 ft (9 m) Depth GOLDEN ARTIFACTS DETECTED AT 20 FT (6 M) DEPTH WITH EXP 6000 SILVER COIN HOARD FOUND WITH OKM EXP 6000 13 GOLD COINS FROM VENICE DETECTED IN TÜRKIYE WITH EXP 6000 Color Display and Touchscreen Color Display and Touchscreen: Easy-to-use GUI with automatic brightness adjustment The Control Unit with touchscreen and multilingual graphical user interface (GUI) is very easy to use. Different layouts and automatic brightness control allow the user to efficiently operate the detector even in varying ambient light conditions. Telescopic Rod with arm rest and handle with trigger for convenient treasure hunting. The Protective Cap can be replaced by a GPS Receiver (optional accessory). The Telescopic Rod can be adjusted to the user's body size in just a few simple steps. Its armrest is equipped with additonal pads for more ergonomics during the treasure hunt. At the lower end, the probes are quickly and easily mounted via a magnetic connector. Interchangeable Probes for Various Purposes Like many high-quality consumer and technical applications, the eXp 6000 probes are made of Carbon. This extremely rigid and light material allows treasure hunters to use the lightweight detector even more easily. Additionally, the probes establish a wireless data connection to the treasure detector to send the scan data directly to the Control Unit. Telescopic Probe This innovative probe can be extended to 124 cm (4 ft) and is perfectly designed to scan both large areas and narrow areas. As a result, treasure hunters need only one probe and avoid the necessity of carrying additional accessories. Super Sensor This specialized ground measuring probe is one of the best ground scanner accessories on the market. By using this antenna, discrimination and pinpointing of buried objects is possible with ease. eXp 6000 Exclusive: Orientation Sensor The orientation sensor assists treasure hunters in holding the probe correctly during the measurement. An icon on the screen and an acoustic signal warns as soon as the probe is held in a wrong angle. Only a correct orientation of the probe guarantees reliable measurements. Various Operating Modes for Professional Applications As top-notch detector, the professional 3D ground scanner eXp 6000 offers various operating modes in one device: 3D Ground Scan Pinpointer Mineral Scan Live Scan* (with Live-Stream Sensor only) Magnetometer Tunnel Scan* (with Tunnel Sensor only) The Tunnel and Live-Stream Sensors are standard equipment of the eXp 6000 Professional Plus. 3D Ground Scan Visualization of underground artifacts and cavities in 3D representations. Pinpointer Identification and localization of detected anomalies. Mineral Scan Detection of natural mineralization, visualized in a color-coded graph. Live Scan* Visualization of artifacts and cavities in real time.*eXp 6000 Professional Plus only Magnetometer Localization of ferromagnetic objects. Tunnel Scan* Detection of tunnels and cavities, visualized in a color-coded graph.*eXp 6000 Professional Plus only Save and Analyze Scan Data The scan data collected in the operating modes Mineral Scan, Tunnel Scan* and 3D Ground Scan can directly be saved in the internal memory of the eXp 6000. After finishing the measurement, the user may open the stored scan files for direct analysis on the eXp 6000 Control Unit or transfer the .v3d files to a computer for detailed analyses. *eXp 6000 Professional Plus only 3D Analysis via Detection Software The treasure hunter gets a first glimpse of his scan data directly on the screen of the Control Unit during the measuring process. After finishing and saving the measurement, the user receives a graphical representation of the scan field with color-coded targets. This scan image can be viewed in 2D and 3D as well as rotated and scaled directly on the Control Unit touchscreen. Thanks to the included 3D software Visualizer 3D Studio Standard Edition, the collected measurement data can afterwards be analyzed in detail on a computer. In this way, the depth, position and size of target objects can be determined and the remarkable objects can supplemented with notes. Discover functions of the Visualizer 3D Studio software Optional Accessories: Android Tablet, Smart Glasses and Power Pack Besides the Windows notebook, detectorists can use the Android tablet to view or observe the 3D ground surveys while scanning. The Power Pack (version D/C) provides additional energy for the detector. With the additional Power Pack the treasure hunter is able to charge the Control Unit and the Telescopic Rod outdoors and even extend the operating time of the detector while scanning the ground. Control Unit Dimensions (H x W x D): 120 x 210 x 280 mm Weight: approx. 2.34 kg Voltage: 11.8 - 19 VDC, 50 W maximal Safety Class: IP40 Operating Time (full charged, 25 °C): approx. 4 hours Operating Temperature: -10 °C – 50 °C Display: 6.5” Diagonal, 1024 x 768 Pixel TFT Color, 650 cd/qm Processing Unit: QuadCore AMD @ 2GHz, OpenGL4.2 HD Radeon GPU Working Memory (RAM): 4 GB Kingston HyperX Data Memory: 8 GB SDCard, Class 10 Feedback: acoustic, visual Storage temperature: -20 °C – 60 °C Air humidity: 5 % – 75 % Waterproof: No Data Transmission Technology: WiFi 802.11n a/b/g, MIMO 2x2 Data Transmission Rate: 11 Mbps – 54 Mbps Operation Distance (line of sight to Telescopic Rod): max. 4 m Telescopic Rod Dimensions (H x W x L): 210 x 135 x 680 - 1340 mm Weight: about 1,76 kg Voltage: 11.8 - 19 VDC, 22 W maximal Safety Class: IP40 Operating Time (full charged, 25 °C): approx. 5 hours Operating Temperature: -10 °C – 50 °C Processing Unit: ARM Cortex M0+ @ 48 MHz Working Memory (RAM): 32 KB Data Memory: 256 KB Storage temperature: -20 °C – 60 °C Air humidity: 5 % – 75 % Waterproof: No Data Transmission Technology: WiFi 802.11n a/b/g Data Transmission Rate: 11 Mbps – 54 Mbps Operation Distance: (line of sight to Control Unit): max. 4 m Super Sensor Length: 950 mm Weight: approx. 0,94 kg Receiver: Dual / Hi-Gain – Vertical - Geophysical Phase Reader – EMSR Sensor technology: SCMI-15-D Telescopic Probe Length: 820 - 1240 mm Weight: approx. 1,36 kg Receiver: Dual Geophysical Phase Reader – EMSR Sensor technology: SCMI-15-D The technical data are average values. Minor deviations are possible during operation.
OKM eXp 6000 Pro Plus
3D Ground Scanner and Metal Detector for Highest Demands The eXp 6000 ground scanner and metal detector is one of OKM’s top of the line detecting tools for treasure hunters, metal detectorists, archaeologists, prospectors, gold seekers and ground surveyors. This detector is completely wireless and can be controlled via touchscreen, video eye glasses or notebook. It is the world’s first 3D ground scanner that utilizes the innovative OKM Telescopic Probe which can be extended to 124 cm (4 ft). eXp 6000 locates ancient bronze vase in more than 4 m depth A successful treasure hunter found a small ancient bronze vase in more than 4 m depth with his ground scanner eXp 6000. The province of Ilam in the west of ... Color Display and Touchscreen The Control Unit with touchscreen and multilingual graphical user interface (GUI) is very easy to use. Different layouts and automatic brightness control allow the user to efficiently operate the detector even in varying ambient light conditions. Telescopic Rod with Removable GPS Receiver The Telescopic Rod can be adjusted to the user's body size in just a few simple steps. Its armrest is equipped with additonal pads for more ergonomics during the treasure hunt. A protective cap is located on the handle, which can be replaced with the GPS Receiver included in the scope of delivery. At the lower end, the probes are quickly and easily mounted via a magnetic connector. Telescopic Rod with arm rest and handle with trigger for convenient treasure hunting. The Protective Cap can be replaced by the GPS Receiver. The removable GPS Receiver allows treasure hunters to track and save their current location. Exchangeable Probes for Various Purposes Like many high-quality consumer and technical applications, the eXp 6000 probes are made of Carbon. This extremely rigid and light material allows treasure hunters to use the lightweight detector even more easily. Additionally, the probes establish a wireless data connection to the treasure detector to send the scan data directly to the Control Unit. Telescopic Probe This innovative probe can be extended to 124 cm (4 ft) and is perfectly designed to scan both large areas and narrow areas. As a result, treasure hunters need only one probe and avoid the necessity of carrying additional accessories. Super Sensor This specialized ground measuring probe is one of the best ground scanner accessories on the market. By using this antenna, discrimination and pinpointing of buried objects is possible with ease. Tunnel Sensor This measuring probe can be mounted to the 3D metal detector to detect hidden tunnels, chambers, cellars, shelters, caves and many other unterground cavities and structures. Live-Stream Sensor This ground scanning probe will stream measuring data immediately onto the display of the eXp 6000 to see underground objects “live”. Thus, the 3D ground scanner user can quickly survey a large area to find potential underground targets. eXp 6000 Exclusive: Orientation Sensor The orientation sensor assists treasure hunters in holding the probe correctly during the measurement. An icon on the screen and a varying acoustic signal warn as soon as the probe is held in a wrong angle. Only a correct orientation of the probe guarantees reliable measurements. Various Operating Modes for Professional Applications As top-notch detector, the professional 3D ground scanner eXp 6000 offers various operating modes in one device: 3D Ground Scan Pinpointer Mineral Scan Live Scan Magnetometer Tunnel Scan 3D Ground Scan Visualization of underground artifacts and cavities in 3D representations. Pinpointer Identification and localization of detected anomalies. Mineral Scan Detection of natural mineralization, visualized in a color-coded graph. Live Scan Visualization of artifacts and cavities in real time. Magnetometer Localization of ferromagnetic objects. Tunnel Scan Detection of tunnels and cavities, visualized in a color-coded graph. Save and Analyze Scan Data The scan data collected in the operating modes Mineral Scan, Tunnel Scan and 3D Ground Scan can directly be saved in the internal memory of the eXp 6000. After finishing the measurement, the user may open the stored scan files for direct analysis on the eXp 6000 Control Unit or transfer the .v3d files to a computer for detailed analyses. 3D Analysis via Detection Software The treasure hunter gets a first glimpse of his scan data directly on the screen of the Control Unit during the measuring process. After finishing and saving the measurement, the user receives a graphical representation of the scan field with color-coded targets. This scan image can be viewed in 2D and 3D as well as rotated and scaled directly on the Control Unit touchscreen. Thanks to the included 3D software Visualizer 3D Studio Professional Edition, the collected measurement data can afterwards be analyzed in detail on a computer. In this way, the depth, position and size of target objects can be determined and the remarkable objects can be marked and supplemented with notes.Discover functions of the Visualizer 3D Studio software Targets Right in Front of Your Eyes Thanks to Smart Glasses Besides the touchscreen, the eXp 6000 ground scanner user can also control the metal detector with the optional Video Eye Glasses. This allows the treasure hunter to focus even better on the environment and to notice any obstacles in the scan field during the measurement. In the projection directly in front of his eye, he simultaneously receives the already recorded scan data. Optional Accessories: Android Tablet, Windows Notebook and Power Pack Both the Android tablet and the Windows notebook can be used in addition to the Control Unit and allow further users to view or observe the 3D ground surveys while scanning. Moreover, the Windows notebook with installed Visualizer 3D Studio detection software allows for detailed scan image analyses. The Power Pack (version D/C) provides additional energy for the detector. With the additional Power Pack the treasure hunter is able to charge the Control Unit and the Telescopic Rod outdoors and even extend the operating time of the detector while scanning the ground. Control Unit Dimensions (H x W x D): 120 x 210 x 280 mm Weight: approx. 2.34 kg Voltage: 11.8 - 19 VDC, 50 W maximal Safety Class: IP40 Operating Time (full charged, 25 °C): approx. 4 hours Operating Temperature: -10 °C – 50 °C Display: 6.5” Diagonal, 1024 x 768 Pixel TFT Color, 650 cd/qm Processing Unit: QuadCore AMD @ 2GHz, OpenGL4.2 HD Radeon GPU Working Memory (RAM): 4 GB Kingston HyperX Data Memory: 8 GB SDCard, Class 10 Feedback: acoustic, visual Storage temperature: -20 °C – 60 °C Air humidity: 5 % – 75 % Waterproof: No Data Transmission Technology: WiFi 802.11n a/b/g, MIMO 2x2 Data Transmission Rate: 11 Mbps – 54 Mbps Operation Distance (line of sight to telescopic rod): max. 4 m Telescopic Rod Dimensions (H x W x L): 210 x 135 x 680 - 1340 mm Weight: about 1,76 kg Voltage: 11.8 - 19 VDC, 22 W maximal Safety Class: IP40 Operating Time (full charged, 25 °C): approx. 5 hours Operating Temperature: -10 °C – 50 °C Processing Unit: ARM Cortex M0+ @ 48 MHz Working Memory (RAM): 32 KB Data Memory: 256 KB Storage temperature: -20 °C – 60 °C Air humidity: 5 % – 75 % Waterproof: No Data Transmission Technology: WiFi 802.11n a/b/g Data Transmission Rate: 11 Mbps – 54 Mbps Operation Distance: (line of sight to control unit): max. 4 m Super Sensor Length: 950 mm Weight: approx. 1.0 kg Receiver: Dual / Hi-Gain – Vertical - Geophysical Phase Reader – EMSR Sensor technology: SCMI-15-D Telescopic Probe Length: 820 - 1240 mm Weight: approx. 1.04 kg Receiver: Dual Geophysical Phase Reader – EMSR Sensor technology: SCMI-15-D Tunnel Sensor Length: 500 mm Weight: approx. 0.76 kg Receiver: Dual Geophysical Phase Reader – EMSR Sensor technology: SCMI-15-D Live-Stream Sensor Length: 600 mm Weight: approx 0.92 kg Receiver: Hexa Geophysical Phase Reader – EMSR Sensor technology: SCMI-15-D GPS Receiver Dimensions (L x W x H): 50 x 55 x 27 mm Weight: about 60 g Input voltage: 5 V DC Input current (maximum): 450 mA Input current (typical): 50 mA Refresh rate: 1 s Cold start: < 40 s Warm start: < 30 s Horizontal Position Accuracy (most cases, outdoor): 2,7 m Horizontal Position Accuracy (free view, clear sky): 0,9 m The technical data are average values. Minor deviations are possible during operation.
